LeapDeviceΒΆ

Properties:

Methods:

class LeapDevice

The LeapDevice class represents a physically connected device.

The LeapDevice class contains information related to a particular connected device such as field of view, device id, and calibrated positions.

NSArray *devices = controller.devices;
LeapDevice *activeDevice = LeapDevice.invalid;
for (LeapDevice *device in devices) {
  if (device.isStreaming) {
    activeDevice = device;
    break; //Only one device can be active at a time
  }
}

Note that Device objects can be invalid, which means that they do not contain valid device information and do not correspond to a physical device. Test for validity with the [LeapDevice isValid] function.

Since 1.0

Public Functions


- (float) distanceToBoundary:(const LeapVector *) position

The distance to the nearest edge of the Leap Motion controller’s view volume.

The view volume is an axis-aligned, inverted pyramid centered on the device origin and extending upward to the range limit. The walls of the pyramid are described by the horizontalViewAngle and verticalViewAngle properties and the roof by the range. This function estimates the distance between the specified input position and the nearest wall or roof of the view volume.

LeapFinger *front = frame.fingers.frontmost;
LeapVector *frontTipPosition = front.tipPosition;

float distanceToEdge = [device distanceToBoundary:frontTipPosition];

Return
The distance in millimeters from the input position to the nearest boundary.
Since 1.0
Parameters
  • position -

    The point to use for the distance calculation.


- (BOOL) equals:(const LeapDevice *) other

Compare LeapDevice object inequality.

Two LeapDevice objects are equal if and only if both LeapDevice objects represent the exact same LeapDevice and both Devices are valid.

[thisDevice equals:thatDevice];

Since 1.0

Property


- (float) baseline
baseline

The device baseline refers to the separation distance between stereo sensors on the device.

The baseline value, together with the maximum resolution, influence the maximum range.

Since 2.2.5


- (float) horizontalViewAngle
horizontalViewAngle

The angle of view along the x axis of this device, in radians.

https://di4564baj7skl.cloudfront.net/documentation/images/Leap_horizontalViewAngle.png

The Leap Motion controller scans a volume in the shape of an inverted pyramid centered at the device’s center and extending upwards. The horizontalViewAngle reports the view angle along the long dimension of the device.

float angleAlongX = device.horizontalViewAngle;

Since 1.0


- (BOOL) isEmbedded
isEmbedded

Reports whether this device is embedded in another computer or computer peripheral.

BOOL isPeripheral = !device.isEmbedded;

Return
True, if this device is embedded in a laptop, keyboard, or other computer component; false, if this device is a standalone controller.
Since
1.2


- (BOOL) isLightingBad
isLightingBad

The software has detected excessive IR illumination, which may interfere with tracking.

If robust mode is enabled, the system will enter robust mode when isLightingBad is true.

Since
3.0


- (BOOL) isSmudged
isSmudged

The software has detected a possible smudge on the translucent cover over the Leap Motion cameras.

Since
3.0


- (BOOL) isStreaming
isStreaming

Reports whether this device is streaming data to your application.

if (device.isStreaming) {
    activeDevice = device;
}

Currently only one controller can provide data at a time.

Since
1.2


- (BOOL) isValid
isValid

Reports whether this is a valid LeapDevice object.

if(device.isValid)
{
    //Use the data...
}

Return
True, if this LeapDevice object contains valid data.
Since 1.0


- (float) range
range

The maximum reliable tracking range, in millimeters.

The range reports the maximum recommended distance from the device center for which tracking is expected to be reliable. This distance is not a hard limit. Tracking may be still be functional above this distance or begin to degrade slightly before this distance depending on calibration and extreme environmental conditions.

float maxRange = device.range;

Since 1.0


- (NSString *) serialNumber
serialNumber

An alphanumeric serial number unique to each device.

Consumer device serial numbers consist of 2 letters followed by 11 digits.

When using multiple devices, the serial number provides an unambiguous identifier for each device.

Since
2.2.2


- (LeapDeviceType) type
type

The device type.

Use the device type value in the (rare) circumstances that you have an application feature which relies on a particular type of device. Current types of device include the original Leap Motion peripheral, keyboard-embedded controllers, and laptop-embedded controllers.

LeapDeviceType type = device.type;

Return
The physical device type as a member of the DeviceType enumeration.
Since
1.2


- (float) verticalViewAngle
verticalViewAngle

The angle of view along the z axis of this device, in radians.

https://di4564baj7skl.cloudfront.net/documentation/images/Leap_verticalViewAngle.png

The Leap Motion controller scans a region in the shape of an inverted pyramid centered at the device’s center and extending upwards. The verticalViewAngle reports the view angle along the short dimension of the device.

float angleAlongZ = device.verticalViewAngle;

Since 1.0

Public Static Functions


+ (LeapDevice *) invalid

Returns an invalid LeapDevice object.

LeapDevice *invalidDevice = LeapDevice.invalid;

Return
The invalid LeapDevice instance.
Since 1.0